[Rdo-list] Overcloud deploy stuck for a long time
Tzach Shefi
tshefi at redhat.com
Wed Oct 14 08:16:46 UTC 2015
Hi Sasha\Dan,
Yep that's my bug I opened yesterday about this.
sshd and firewall rules look OK having tested below:
I can ssh into the virt host from my laptop with root user, checking
10.X.X.X net
Can also ssh from instack vm to virt host, checking 192.168.122.X net.
Unless I should check ssh with other user, if so which ?
I doubt ssh user/firewall caused the problem as controller was installed
successfully and it too uses same procedure ssh virt power-on method.
Deployment is still up & stuck if any one ones to take a look contact me
for access details in private.
Will review/use virt console, virt journal and timeout tips on next
deployment.
Thanks
Tzach
On Wed, Oct 14, 2015 at 5:07 AM, Sasha Chuzhoy <sasha at redhat.com> wrote:
> I hit the same (or similar) issue on my BM environment, though I manage to
> complete the 1+1 deployment on VM successfully.
> I see it's reported already:
> https://bugzilla.redhat.com/show_bug.cgi?id=1271289
>
> Ran a deployment with: openstack overcloud deploy --templates --timeout
> 90 --compute-scale 3 --control-scale 1
> The deployment fails, and I see that "all minus one" overcloud nodes are
> still in BUILD status.
>
> [stack at undercloud ~]$ nova list
>
> +--------------------------------------+-------------------------+--------+------------+-------------+---------------------+
> | ID | Name | Status
> | Task State | Power State | Networks |
>
> +--------------------------------------+-------------------------+--------+------------+-------------+---------------------+
> | b15f499e-79ed-46b2-b990-878dbe6310b1 | overcloud-controller-0 | BUILD
> | spawning | NOSTATE | ctlplane=192.0.2.23 |
> | 4877d14a-e34e-406b-8005-dad3d79f5bab | overcloud-novacompute-0 | ACTIVE
> | - | Running | ctlplane=192.0.2.9 |
> | 0fd1a7ed-367e-448e-8602-8564bf087e92 | overcloud-novacompute-1 | BUILD
> | spawning | NOSTATE | ctlplane=192.0.2.21 |
> | 51630a7d-c140-47b9-a071-1f2fdb45f4b4 | overcloud-novacompute-2 | BUILD
> | spawning | NOSTATE | ctlplane=192.0.2.22 |
>
>
> Will try to investigate further tomorrow.
>
> Best regards,
> Sasha Chuzhoy.
>
> ----- Original Message -----
> > From: "Tzach Shefi" <tshefi at redhat.com>
> > To: "Dan Sneddon" <dsneddon at redhat.com>
> > Cc: rdo-list at redhat.com
> > Sent: Tuesday, October 13, 2015 6:01:48 AM
> > Subject: Re: [Rdo-list] Overcloud deploy stuck for a long time
> >
> > So gave it a few more hours, on heat resource nothing is failed only
> > create_complete and some init_complete.
> >
> > Nova show
> > | 61aaed37-4993-4165-93a7-3c9bf6b10a21 | overcloud-controller-0 | ACTIVE
> | -
> > | | Running | ctlplane=192.0.2.8 |
> > | 7f9f4f52-3ee6-42d9-9275-ff88582dd6e7 | overcloud-novacompute-0 | BUILD
> |
> > | spawning | NOSTATE | ctlplane=192.0.2.9 |
> >
> >
> > nova show 7f9f4f52-3ee6-42d9-9275-ff88582dd6e7
> >
> +--------------------------------------+----------------------------------------------------------+
> > | Property | Value |
> >
> +--------------------------------------+----------------------------------------------------------+
> > | OS-DCF:diskConfig | MANUAL |
> > | OS-EXT-AZ:availability_zone | nova |
> > | OS-EXT-SRV-ATTR:host | instack.localdomain |
> > | OS-EXT-SRV-ATTR:hypervisor_hostname |
> 4626bf90-7f95-4bd7-8bee-5f5b0a0981c6
> > | |
> > | OS-EXT-SRV-ATTR:instance_name | instance-00000002 |
> > | OS-EXT-STS:power_state | 0 |
> > | OS-EXT-STS:task_state | spawning |
> > | OS-EXT-STS:vm_state | building |
> >
> > Checking nova log this is what I see:
> >
> > nova-compute.log:{"nodes": [{"target_power_state": null, "links":
> [{"href": "
> > http://192.0.2.1:6385/v1/nodes/4626bf90-7f95-4bd7-8bee-5f5b0a0981c6 ",
> > "rel": "self"}, {"href": "
> > http://192.0.2.1:6385/nodes/4626bf90-7f95-4bd7-8bee-5f5b0a0981c6 ",
> "rel":
> > "bookmark"}], "extra": {}, "last_error": " Failed to change power state
> to
> > 'power on'. Error: Failed to execute command via SSH : LC_ALL=C
> > /usr/bin/virsh --connect qemu:///system start baremetalbrbm_1.",
> > "updated_at": "2015-10-12T14:36:08+00:00", "maintenance_reason": null,
> > "provision_state": "deploying", "clean_step": {}, "uuid":
> > "4626bf90-7f95-4bd7-8bee-5f5b0a0981c6", "console_enabled": false,
> > "target_provision_state": "active", "provision_updated_at":
> > "2015-10-12T14:35:18+00:00", "power_state": "power off",
> > "inspection_started_at": null, "inspection_finished_at": null,
> > "maintenance": false, "driver": "pxe_ssh", "reservation": null,
> > "properties": {"memory_mb": "4096", "cpu_arch": "x86_64", "local_gb":
> "40",
> > "cpus": "1", "capabilities": "boot_option:local"}, "instance_uuid":
> > "7f9f4f52-3ee6-42d9-9275-ff88582dd6e7", "name": null, "driver_info":
> > {"ssh_username": "root", "deploy_kernel":
> > "94cc528d-d91f-4ca7-876e-2d8cbec66f1b", "deploy_ramdisk":
> > "057d3b42-002a-4c24-bb3f-2032b8086108", "ssh_key_contents": "-----BEGIN(
> I
> > removed key..)END RSA PRIVATE KEY-----", "ssh_virt_type": "virsh",
> > "ssh_address": "192.168.122.1"}, "created_at":
> "2015-10-12T14:26:30+00:00",
> > "ports": [{"href": "
> >
> http://192.0.2.1:6385/v1/nodes/4626bf90-7f95-4bd7-8bee-5f5b0a0981c6/ports
> ",
> > "rel": "self"}, {"href": "
> > http://192.0.2.1:6385/nodes/4626bf90-7f95-4bd7-8bee-5f5b0a0981c6/ports
> ",
> > "rel": "bookmark"}], "driver_internal_info": {"clean_steps": null,
> > "root_uuid_or_disk_id": "9ff90423-9d18-4dd1-ae96-a4466b52d9d9",
> > "is_whole_disk_image": false}, "instance_info": {"ramdisk":
> > "82639516-289d-4603-bf0e-8131fa75ec46", "kernel":
> > "665ffcb0-2afe-4e04-8910-45b92826e328", "root_gb": "40", "display_name":
> > "overcloud-novacompute-0", "image_source":
> > "d99f460e-c6d9-4803-99e4-51347413f348", "capabilities":
> "{\"boot_option\":
> > \"local\"}", "memory_mb": "4096", "vcpus": "1", "deploy_key":
> > "BI0FRWDTD4VGHII9JK2BYDDFR8WB1WUG", "local_gb": "40", "configdrive":
> >
> "H4sICGDEG1YC/3RtcHpwcWlpZQDt3WuT29iZ2HH02Bl7Fe/G5UxSqS3vLtyesaSl2CR4p1zyhk2Ct+ateScdVxcIgiR4A5sAr95xxa/iVOUz7EfJx8m7rXyE5IDslro1mpbGox15Zv6/lrpJ4AAHN/LBwXMIShIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAADhJpvx+5UQq5EqNtvzldGs+MIfewJeNv53f/7n354F6xT/3v/TjH0v/chz0L5+8Gv2f3V+n0s+Pz34u/dj982PJfvSTvxFVfXQ7vfyBlRfGvOZo+kQuWWtNVgJn/jO/d6kHzvrGWlHOjGn0TDfmjmXL30kZtZSrlXPFREaVxQM5Hon4fdl0TU7nCmqtU6urRTlZVRP1clV+knwqK/F4UFbPOuVGKZNKFNTbgVFvwO+PyPmzipqo1solX/6slszmCuKozBzKuKPdMlE5ma
> >
> >
> > Any ideas on how to resolve a stuck spawning compute node, it's stuck
> hasn't
> > changed for a few hours now.
> >
> > Tzach
> >
> > Tzach
> >
> >
> > On Mon, Oct 12, 2015 at 11:25 PM, Dan Sneddon < dsneddon at redhat.com >
> wrote:
> >
> >
> >
> > On 10/12/2015 08:10 AM, Tzach Shefi wrote:
> > > Hi,
> > >
> > > Server running centos 7.1, vm running for undercloud got up to
> > > overcloud deploy stage.
> > > It looks like its stuck nothing advancing for a while.
> > > Ideas, what to check?
> > >
> > > [stack at instack ~]$ openstack overcloud deploy --templates
> > > Deploying templates in the directory
> > > /usr/share/openstack-tripleo-heat-templates
> > > [91665.696658] device vnet2 entered promiscuous mode
> > > [91665.781346] device vnet3 entered promiscuous mode
> > > [91675.260324] kvm [71183]: vcpu0 disabled perfctr wrmsr: 0xc1 data
> 0xffff
> > > [91675.291232] kvm [71200]: vcpu0 disabled perfctr wrmsr: 0xc1 data
> 0xffff
> > > [91767.799404] kvm: zapping shadow pages for mmio generation wraparound
> > > [91767.880480] kvm: zapping shadow pages for mmio generation wraparound
> > > [91768.957761] device vnet2 left promiscuous mode
> > > [91769.799446] device vnet3 left promiscuous mode
> > > [91771.223273] device vnet3 entered promiscuous mode
> > > [91771.232996] device vnet2 entered promiscuous mode
> > > [91773.733967] kvm [72245]: vcpu0 disabled perfctr wrmsr: 0xc1 data
> 0xffff
> > > [91801.270510] device vnet2 left promiscuous mode
> > >
> > >
> > > Thanks
> > > Tzach
> > >
> > >
> > > _______________________________________________
> > > Rdo-list mailing list
> > > Rdo-list at redhat.com
> > > https://www.redhat.com/mailman/listinfo/rdo-list
> > >
> > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > >
> >
> > You're going to need a more complete command line than "openstack
> > overcloud deploy --templates". For instance, if you are using VMs for
> > your overcloud nodes, you will need to include "--libvirt-type qemu".
> > There are probably a couple of other parameters that you will need.
> >
> > You can watch the deployment using this command, which will show you
> > the progress:
> >
> > watch "heat resource-list -n 5 | grep -v COMPLETE"
> >
> > You can also explore which resources have failed:
> >
> > heat resource-list [-n 5]| grep FAILED
> >
> > And then look more closely at the failed resources:
> >
> > heat resource-show overcloud <resource>
> >
> > There are some more complete troubleshooting instructions here:
> >
> >
> http://docs.openstack.org/developer/tripleo-docs/troubleshooting/troubleshooting-overcloud.html
> >
> > --
> > Dan Sneddon | Principal OpenStack Engineer
> > dsneddon at redhat.com | redhat.com/openstack
> > 650.254.4025 | dsneddon:irc @dxs:twitter
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
> >
> >
> >
> > --
> > Tzach Shefi
> > Quality Engineer, Redhat OSP
> > +972-54-4701080
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
>
--
*Tzach Shefi*
Quality Engineer, Redhat OSP
+972-54-4701080 <callto:+972-52-4534729>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20151014/60cd070d/attachment.html>
More information about the dev
mailing list