[Rdo-list] port qg-xxxxxx of external gateway goes to br-int instead of br-eth2
Dan Sneddon
dsneddon at redhat.com
Thu Aug 6 18:21:50 UTC 2015
On 08/06/2015 03:34 AM, ICHIBA Sara wrote:
> Hello guys,
>
> I'm trying to add a second external network to my openstack. I followed
> the documentation, created a new router and set the new gateway. I
> can't ping my external gateway from my router namespace and I can ping
> this gateway from my server.
>
> I kept comparing the configuration of my new external gateway (which
> doesn't work in neutron) and my oldest one (which keeps working) and
> noticed that when I set a gateway to my router this creates a port with
> a name that bigins with qg. Normally this port has to be assigned to
> the external bridge (in my case it should be the new external bridge
> br-eth2). BUT what I saw is that this port qg-xxx is mapped instead to
> the br-int.
>
> For more explanation please see my confs and some command outputs:
>
>
> [root at OScontroller templates(keystone_admin)]# neutron net-external-list
> +--------------------------------------+-------------------+------------------------------------------------------+
> | id | name |
> subnets |
> +--------------------------------------+-------------------+------------------------------------------------------+
> | 59c6f54f-26e3-4360-8a05-1a63285c846c | public |
> 6744a5b3-1a33-42ae-8ae7-1467ebdc1b13 192.168.5.0/24
> <http://192.168.5.0/24> |
> | 7ee9f199-2c22-42a9-a6af-1b06c2d62a35 | ruckus_management |
> cba357ee-f9a7-49f3-89e4-9f5d864747cd 192.168.31.0/24
> <http://192.168.31.0/24> |
> +--------------------------------------+-------------------+------------------------------------------------------+
>
>
>
>
>
>
>
> ****this router with its gateway are working***
>
> [root at OScontroller templates(keystone_admin)]# ip netns exec
> qrouter-e8243f85-4c56-47bd-a1ee-40724a861dc6 ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
> valid_lft forever preferred_lft forever
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 25: qr-2b96e8b6-38: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue state UNKNOWN
> link/ether fa:16:3e:b5:54:4d brd ff:ff:ff:ff:ff:ff
> inet 10.0.0.1/24 <http://10.0.0.1/24> brd 10.0.0.255 scope global
> qr-2b96e8b6-38
> valid_lft forever preferred_lft forever
> inet6 fe80::f816:3eff:feb5:544d/64 scope link
> valid_lft forever preferred_lft forever
> 26: qr-9e50bd2e-fa: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue state UNKNOWN
> link/ether fa:16:3e:fc:06:9b brd ff:ff:ff:ff:ff:ff
> inet 20.0.0.1/24 <http://20.0.0.1/24> brd 20.0.0.255 scope global
> qr-9e50bd2e-fa
> valid_lft forever preferred_lft forever
> inet6 fe80::f816:3eff:fefc:69b/64 scope link
> valid_lft forever preferred_lft forever
> 27: qg-cd45a565-0b: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue state UNKNOWN
> link/ether fa:16:3e:20:81:60 brd ff:ff:ff:ff:ff:ff
> inet 192.168.5.100/24 <http://192.168.5.100/24> brd 192.168.5.255
> scope global qg-cd45a565-0b
> valid_lft forever preferred_lft forever
> inet 192.168.5.101/32 <http://192.168.5.101/32> brd 192.168.5.101
> scope global qg-cd45a565-0b
> valid_lft forever preferred_lft forever
> inet 192.168.5.103/32 <http://192.168.5.103/32> brd 192.168.5.103
> scope global qg-cd45a565-0b
> valid_lft forever preferred_lft forever
> inet6 fe80::f816:3eff:fe20:8160/64 scope link
> valid_lft forever preferred_lft forever
>
>
>
>
>
>
> ************* this is the new router and gateway that I configured and
> they are not working
> [root at OScontroller templates(keystone_admin)]# ip netns exec
> qrouter-b3c51abb-4a14-4af2-ae72-b41e7cba4e84 ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
> valid_lft forever preferred_lft forever
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 38: qg-6406f3e3-72: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue state UNKNOWN
> link/ether fa:16:3e:63:48:64 brd ff:ff:ff:ff:ff:ff
> inet 192.168.31.70/24 <http://192.168.31.70/24> brd 192.168.31.255
> scope global qg-6406f3e3-72
> valid_lft forever preferred_lft forever
> inet6 fe80::f816:3eff:fe63:4864/64 scope link
> valid_lft forever preferred_lft forever
>
>
>
>
> [root at OScontroller templates(keystone_admin)]# ovs-vsctl show
> 9b3e4cc7-6761-483e-a538-1a132734d1a5
> Bridge br-tun
> Port br-tun
> Interface br-tun
> type: internal
> Port "vxlan-c0a80523"
> Interface "vxlan-c0a80523"
> type: vxlan
> options: {df_default="true", in_key=flow,
> local_ip="192.168.5.34", out_key=flow, remote_ip="192.168.5.35"}
> Port patch-int
> Interface patch-int
> type: patch
> options: {peer=patch-tun}
> Bridge "br-eth2"
> Port "phy-br-eth2"
> Interface "phy-br-eth2"
> type: patch
> options: {peer="int-br-eth2"}
> Port "eth2"
> Interface "eth2"
> Port "br-eth2"
> Interface "br-eth2"
> type: internal
> Bridge br-int
> fail_mode: secure
> Port "qr-9e50bd2e-fa"
> tag: 1
> Interface "qr-9e50bd2e-fa"
> type: internal
> Port "tap61f76964-85"
> tag: 1
> Interface "tap61f76964-85"
> type: internal
> Port "qvo0952a802-99"
> tag: 2
> Interface "qvo0952a802-99"
> Port "qvo5cc221dc-e8"
> tag: 1
> Interface "qvo5cc221dc-e8"
> Port "tap599b2f77-21"
> tag: 4095
> Interface "tap599b2f77-21"
> type: internal
> Port "tapa383b7ae-99"
> tag: 2
> Interface "tapa383b7ae-99"
> type: internal
> Port "tapbea1a763-0b"
> tag: 2
> Interface "tapbea1a763-0b"
> type: internal
> Port "qr-2b96e8b6-38"
> tag: 2
> Interface "qr-2b96e8b6-38"
> type: internal
> Port int-br-ex
> Interface int-br-ex
> type: patch
> options: {peer=phy-br-ex}
> Port "qg-6406f3e3-72"
> tag: 9
> Interface "qg-6406f3e3-72"
> type: internal
> Port patch-tun
> Interface patch-tun
> type: patch
> options: {peer=patch-int}
> Port "int-br-eth2"
> Interface "int-br-eth2"
> type: patch
> options: {peer="phy-br-eth2"}
> Port br-int
> Interface br-int
> type: internal
> Bridge br-ex
> Port "qg-cd45a565-0b"
> Interface "qg-cd45a565-0b"
> type: internal
> Port br-ex
> Interface br-ex
> type: internal
> Port "eth0"
> Interface "eth0"
> Port phy-br-ex
> Interface phy-br-ex
> type: patch
> options: {peer=int-br-ex}
> ovs_version: "2.3.1"
> [root at OScontroller templates(keystone_admin)]#
>
>
>
> ************************fichiers de conf*********************
>
> [root at OScontroller neutron]# cat l3_agent.ini | grep -v ^# | grep -v ^$
> [DEFAULT]
> debug = False
> interface_driver =neutron.agent.linux.
> interface.OVSInterfaceDriver
> use_namespaces = True
> gateway_external_network_id =
> handle_internal_only_routers = True
> external_network_bridge =
> metadata_port = 9697
> send_arp_for_ha = 3
> periodic_interval = 40
> periodic_fuzzy_delay = 5
> enable_metadata_proxy = True
> router_delete_namespaces = False
> agent_mode = legacy
> allow_automatic_l3agent_failover=False
>
>
>
> root at OScontroller neutron]# cat plugin.ini | grep -v ^# | grep -v ^$
> [ml2]
> type_drivers = vxlan
> tenant_network_types = vxlan
> mechanism_drivers =openvswitch
> [ml2_type_flat]
> [ml2_type_vlan]
> [ml2_type_gre]
> [ml2_type_vxlan]
> vni_ranges =10:100
> vxlan_group =224.0.0.1
> [securitygroup]
> enable_security_group = True
>
>
> [root at OScontroller openvswitch]# cat ovs_neutron_plugin.ini | grep -v
> ^# | grep -v ^$
> [ovs]
> enable_tunneling = True
> integration_bridge = br-int
> tunnel_bridge = br-tun
> local_ip =192.168.5.34
> network_vlan_ranges = physnet1,physnet2
> bridge_mappings =physnet1:br-ex,physnet2:br-eth2
> [agent]
> polling_interval = 2
> tunnel_types =vxlan
> vxlan_udp_port =4789
> l2_population = False
> arp_responder = False
> enable_distributed_routing = False
> [securitygroup]
> firewall_driver =
> neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
>
>
> [root at OScontroller network-scripts]# cat ifcfg-eth0
> NAME=eth0
> UUID=1b3a9854-df55-43cf-a9b8-21c1a9cc1e5b
> DEVICE=eth0
> HWADDR=44:1e:a1:75:ea:d6
> DEVICETYPE=ovs
> OVS_BRIDGE=br-ex
> ONBOOT=yes
> TYPE=OVSPort
> NM_CONTROLLED=yes
>
>
> [root at OScontroller network-scripts]# cat ifcfg-eth2
> NAME=eth2
> DEVICE=eth2
> HWADDR=44:1e:a1:75:ea:d2
> DEVICETYPE=ovs
> OVS_BRIDGE=br-eth2
> ONBOOT=yes
> TYPE=OVSPort
> NM_CONTROLLED=yes
>
>
> [root at OScontroller network-scripts]# cat ifcfg-br-eth2
> DEVICE=br-eth2
> DEVICETYPE=ovs
> TYPE=OVSBridge
> BOOTPROTO=static
> IPADDR=192.168.31.34
> NETMASK=255.255.255.0
> ONBOOT=yes
> GATEWAY=192.168.31.1
> DNS1=8.8.8.8
>
>
> [root at OScontroller network-scripts]# cat ifcfg-br-ex
> DEVICE=br-ex
> DEVICETYPE=ovs
> TYPE=OVSBridge
> BOOTPROTO=static
> IPADDR=192.168.5.34
> NETMASK=255.255.255.0
> ONBOOT=yes
> GATEWAY=192.168.5.1
> DNS1=8.8.8.8
> DNS2=192.168.5.1
>
>
> Thank you for your help,
> Sara
>
>
>
>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>
In /etc/neutron/l3_agent.ini, there is a setting which influences the
use of the external bridge:
external_network_bridge =
If this is set to 'br-ex', then the floating IP network is tied to
br-ex, and you can have only one floating IP network.
If on the other hand, this setting is blank, then the floating IP
networks get patched into br-int, and you can have as many as you want.
The bridges that do get used for the floating IP networks should be
included in the bridge mappings.
What I would do in your case is to rename the br-ex bridge to something
else (br-eth1?). Then your bridge mappings becomes:
/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini:
bridge_mappings =physnet1:br-eth1,physnet2:br-eth2
You will have to delete br-ex, add br-eth1 (or whatever is
appropriate), and then add the interface to the new bridge. Change the
Neutron plugin files, and restart the Neutron services.
--
Dan Sneddon | Principal OpenStack Engineer
dsneddon at redhat.com | redhat.com/openstack
650.254.4025 | dsneddon:irc @dxs:twitter
More information about the dev
mailing list