[Rdo-list] Packstack error

Fri Nov 7 10:47:27 UTC 2014

Hi Arash,

Thanks for the quick reply. Sorry I forgot to mention that the OS is 
rhel 7, and selinux was not set to permisive.I just changed it but I get 
the same error:

# setenforce permissive
# packstack --allinone
[...]
ERROR : Error appeared during Puppet run: 10.8.6.2_keystone.pp
Error: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Could not evaluate: Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ service-list' returned 1: Service Unavailable (HTTP 503)

Firewalld is not running

# systemctl status firewalld
firewalld.service - firewalld - dynamic firewall daemon
    Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled)
    Active: inactive (dead)

I'll keep going with this for a little bit, but If CentOs 7 is working 
I'll probably change the OS and I'll give it a try.

Thanks,
David

On 07/11/14 10:34, Arash Kaffamanesh wrote:
> David,
> On which OS are you deploying? CentOS 7?
> I did the AIO and multi node installation several times on CentOS 7 
> without any problems.
> By the way, did you set selinux to permissive? Is firewalld running? 
> If yes disable both.
>
> -Arash
>
>
> On Fri, Nov 7, 2014 at 11:24 AM, David Ocana <docana at ebi.ac.uk 
> <mailto:docana at ebi.ac.uk>> wrote:
>
>     Hi everyone,
>
>     I'm installing the latest juno RDO release and I ran into this
>     problem:
>
>     # yum -y update
>     # yum install rdo-release-juno-1.noarch.rpm
>     # yum install -y openstack-packstack
>     # packstack --allinone
>     Installing:
>     Clean Up [ DONE ]
>     Setting up ssh keys                                 [ DONE ]
>     Discovering hosts' details                        [ DONE ]
>     Adding pre install manifest entries           [ DONE ]
>     [...]
>     10.8.6.2_keystone.pp:                             [ ERROR ]
>     Applying Puppet manifests                      [ ERROR ]
>
>     ERROR : Error appeared during Puppet run: 10.8.6.2_keystone.pp
>     Error:
>     /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]:
>     Could not evaluate: Execution of '/usr/bin/keystone --os-endpoint
>     http://127.0.0.1:35357/v2.0/ service-list' returned 1: Service
>     Unavailable (HTTP 503)
>     You will find full trace in log
>     /var/tmp/packstack/20141107-090534-05fJzm/manifests/10.8.6.2_keystone.pp.log
>     Please check log file
>     /var/tmp/packstack/20141107-090534-05fJzm/openstack-setup.log for
>     more information
>
>     The service seems to be running because you get a 503 response,
>     but I checked it:
>     -------------------
>     # netstat -putln | grep 35357
>     tcp        0      0 0.0.0.0:35357 <http://0.0.0.0:35357>        
>      0.0.0.0:* LISTEN      24884/python
>     -------------------
>
>     I checked the file
>     /var/tmp/packstack/20141107-090534-05fJzm/manifests/10.8.6.2_keystone.pp.log
>     and this is the most relevant:
>     -----------------
>     Notice:
>     /Stage[main]/Keystone/Keystone_config[database/idle_timeout]/ensure:
>     created
>     Notice:
>     /Stage[main]/Keystone/Keystone_config[DEFAULT/verbose]/ensure: created
>     Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage
>     db_sync]: Triggered 'refresh' from 32 events
>     Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]:
>     Triggered 'refresh' from 31 events
>     Notice: /Stage[main]/Keystone::Service/Service[keystone]/ensure:
>     ensure changed 'stopped' to 'running'
>     Error:
>     /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]:
>     Could not evaluate: Execution of '/usr/bin/keystone --os-endpoint
>     http://127.0.0.1:35357/v2.0/ service-list' returned 1: Service
>     Unavailable (HTTP 503)
>     Error:
>     /Stage[main]/Ceilometer::Keystone::Auth/Keystone_service[ceilometer]:
>     Could not evaluate: Execution of '/usr/bin/keystone --os-endpoint
>     http://127.0.0.1:35357/v2.0/ service-list' returned 1: Service
>     Unavailable (HTTP 503)
>     Error: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]:
>     Could not evaluate: Execution of '/usr/bin/keystone --os-endpoint
>     http://127.0.0.1:35357/v2.0/ tenant-list' returned 1: Service
>     Unavailable (HTTP 503)
>     (from here down it's the same error messages)
>     ------------------
>
>     Here is keystone.log, no errors, only info and warning messages:
>     -------------------
>     2014-11-07 10:15:31.995 30006 INFO
>     keystone.openstack.common.service [-] Starting 16 workers
>     2014-11-07 10:15:31.995 30029 INFO eventlet.wsgi.server [-]
>     (30029) wsgi starting up on http://0.0.0.0:35357/
>     2014-11-07 10:15:31.997 30006 INFO
>     keystone.openstack.common.service [-] Started child 30030
>     [...]
>     2014-11-07 10:16:01.881 30494 WARNING
>     keystone.openstack.common.versionutils [-] Deprecated:
>     keystone.token.backends.sql.Token is deprecated as of Juno in
>     favor of keystone.token.persistence.backends.sql.Token and may be
>     removed in Kilo.
>     2014-11-07 10:16:01.904 30494 INFO
>     keystone.token.persistence.backends.sql [-] Token expiration batch
>     size: 1000
>     2014-11-07 10:16:01.908 30494 INFO
>     keystone.token.persistence.backends.sql [-] Total expired tokens
>     removed: 0
>     -------------------
>
>     Has anyone had this problem?
>
>     Thanks in advance.
>
>     Cheers,
>     David
>
>
>
>
>
>     _______________________________________________
>     Rdo-list mailing list
>     Rdo-list at redhat.com <mailto:Rdo-list at redhat.com>
>     https://www.redhat.com/mailman/listinfo/rdo-list
>
>