neutron subnet-create --name public_subnet --enable_dhcp=False   --allocation-pool=start=10.10.179.230,end=10.10.179.250 --gateway=10.10.183.254 external_network 10.10.176.0/21


Syntax error highlighted red


neutron subnet-create    --name public_subnet    --enable_dhcp=False   --allocation-pool  start=10.10.179.230,end=10.10.179.250   --gateway=10.10.183.254   external_network   10.10.176.0/21



Address:                        10.10.176.0    00001010.00001010.10110000.00000000

Netmask:                      255.255.248.0 1 11111111.11111111.11111000.00000000

Wildcard:                       0.0.7.255       00000000.00000000.00000111.11111111

Network Address:     10.10.176.0/21   00001010.00001010.10110000.00000000

Broadcast Address:   10.10.183.255      00001010.00001010.10110111.11111111

First host:                     10.10.176.1            00001010.00001010.10110000.00000001

Last host:                      10.10.183.254      00001010.00001010.10110111.11111110

Total host count: 2046


From: rdo-list-bounces@redhat.com <rdo-list-bounces@redhat.com> on behalf of Jamie Duncan <jduncan@redhat.com>
Sent: Friday, January 8, 2016 9:05 PM
To: rdo-list@redhat.com
Subject: [Rdo-list] Confusion with Floating IPs in RDO Liberty Packstack 3-node setup
 
I have a 3-node setup using packstack. It went smoothly with no issues.

I created a public subnet with the following command.

neutron subnet-create --name public_subnet --enable_dhcp=False --allocation-pool=start=10.10.179.230,end=10.10.179.250 --gateway=10.10.183.254 external_network 10.10.176.0/21

So I should have about 18 usable IP addresses. Perfect.

But I only have 2.

[root@dell-r430-13 ~(keystone_atomic)]# neutron floatingip-list
+--------------------------------------+------------------+---------------------+---------+
| id                                   | fixed_ip_address | floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+---------+
| 1c94a153-20d4-43cd-b8c2-4d259975e043 |                  | 10.10.179.235       |         |
| ad4e0089-2d4d-46dd-a0f2-21b6c854398d |                  | 10.10.179.232       |         |
+--------------------------------------+------------------+---------------------+---------+

I had to create the floating IPs manually with a for loop. 

It wasn't hard. I'm just wondering what I did wrong, or if that's something I've just somehow missed every other time.