On Mon, Dec 29, 2014 at 9:04 PM, Patrick Laimbock <patrick@laimbock.com> wrote:

On 29-12-14 15:39, Deepak Shetty wrote:

> You need to disable NetworkManager and enable network service. Before
you run Packstack you will also need to setup the ifcfg-XXXX network
interfaces on all nodes and activate them.

Why can't packstack handle this itself if it doesn't support NM? I m

Ask the developers. Patches welcome.

concerned about the manual steps involved and losing on my n/w
connections in case i do anything wrong.

Yes that's a risk so make sure to have the steps figured out before doing anything. Having direct access to a (serial) console comes in handy if things fall apart.

Is there any reference on how
to do this, i couldn't find anything specific on the quickstart page.

I'm not aware of an RDO guide on this subject. The steps on each node are:
- create appropriate ifcfg-XXX files
- stop NetworkManager
- disable NetworkManager
- enable network
- start network

You probably want to do the last 4 steps in one long command or else you will loose connectivity after stopping NetworkManager if you are not using a console.

My current ifcfg-em1 is :

[root@rhsdev1 network-scripts]# cat ifcfg-em1
# Generated by dracut initrd
DEVICE="em1"
ONBOOT=yes
NETBOOT=yes
UUID="fd67c34e-9aad-44b7-a980-b5288ad3c442"
IPV6INIT=yes
BOOTPROTO=dhcp
HWADDR="c8:1f:66:c6:d5:fc"
TYPE=Ethernet
NAME="em1"

I did this:

# systemctl stop NetworkManager.service ; chkconfig NetworkManager off; systemctl restart network.service ; chkconfig network on

Note: Forwarding request to 'systemctl disable NetworkManager.service'.
rm '/etc/systemd/system/multi-user.target.wants/NetworkManager.service'
rm '/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service'
rm '/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service'
Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.

[root@rhsdev1 network-scripts]# systemctl status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed (Result: exit-code) since Tue 2014-12-30 17:01:00 IST; 30s ago

Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com network[24948]: RTNETLINK answers: File exists
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com systemd[1]: network.service: control process exited, code=exited status=1
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com systemd[1]: Failed to start LSB: Bring up/down networking.
Dec 30 17:01:00 rhsdev1.lab.eng.blr.redhat.com systemd[1]: Unit network.service entered failed state.

I modified em1 to:

[root@rhsdev1 network-scripts]# cat ifcfg-em1
# Generated by dracut initrd
DEVICE="em1"
ONBOOT=yes
NETBOOT=yes
UUID="fd67c34e-9aad-44b7-a980-b5288ad3c442"
IPV6INIT=yes
BOOTPROTO=dhcp
#HWADDR="c8:1f:66:c6:d5:fc"
NM_CONTROLLED=no
TYPE=Ethernet
NAME="em1"

[root@rhsdev1 network-scripts]# service network restart
Restarting network (via systemctl): Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
                                                           [FAILED]
[root@rhsdev1 network-scripts]# systemctl restart network.service
Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
[root@rhsdev1 network-scripts]# systemctl status network.service
network.service - LSB: Bring up/down networking
   Loaded: loaded (/etc/rc.d/init.d/network)
   Active: failed (Result: exit-code) since Tue 2014-12-30 17:07:34 IST; 6s ago
Process: 26318 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com network[26318]: RTNETLINK answers: File exists
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com systemd[1]: network.service: control process exited, code=exited status=1
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com systemd[1]: Failed to start LSB: Bring up/down networking.
Dec 30 17:07:34 rhsdev1.lab.eng.blr.redhat.com systemd[1]: Unit network.service entered failed state.

So in short, disabling NM and enabling/restarting network isn't working as my network service is getting into error state

thanx,
deepak

HTH,
Patrick

_______________________________________________
Rdo-list mailing list
Rdo-list@redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list